Top 10 Tips for Cleaning Your HVAC System
Clean air ducts have numerous benefits. Having a clean HVAC system will cut down on dust, allergens, and other contaminants that can make your property less than comfortable. If you’re a DIY enthusiast, add cleaning your HVAC system to the list.
Here are our top 10 tips for cleaning your HVAC system.
Tools You’ll Need for Cleaning Your HVAC System:
- A vacuum with a hose attachment
- Brush with a long handle and stiff bristles
- A screwdriver
- Furnace filter
Cleaning Your HVAC System: Our Top Tips
Grab your dust mask and gloves. Then, follow these tips for a squeaky clean, and healthy HVAC system.
1. Cover the Registers
Use paper towels or clothes to cover the supply registers during cleaning. This will keep dust and debris from blowing into the home while you’re cleaning. Just lift the grills, cover the opening, then replace the grills.
2. Turn on the Fan
Before you start cleaning, turn off the heat supply, then turn on the fan to loosen debris.
3. Clean the Supply Registers First
Use the brush and vacuum cleaner to remove dust, dirt, and allergens from the supply registers. The long handle brush should be sufficient for getting deep into the pipes.
4. Clean the Return Air Registers
Repeat step three above on the return air registers.
5. Shut the Power Supply to the HVAC System
After cleaning the supply and return air registers, let the fan run for a couple of minutes. Then, turn off the power connected to the system. You’ll need access to the main ducts in the next few steps, and you don’t want to be cleaning when it’s hot.
6. Remove the Air Duct Covers
You’ll probably need a screwdriver for this part. Next, unscrew the air duct covers, and clean the grates with a soapy towel and water.
7. Vacuum the Air Ducts
With the hose attachment, thoroughly vacuum the air duct system. Use the brush to remove moldy spots and stuck-on grime. A cleaning cloth should take care of the rest. Use it to wipe the interior of the duct. You can wrap it around the brush head for areas out of reach.
8. Clean the Blower Compartment
The blower compartment can clog if left uncleaned for too long. Remove the panels covering the blower compartment and clean it with a soft cloth. Be extra careful when cleaning the furnace fan.
9. Replace the Furnace Filter
The final step is to replace the furnace filter. A clogged furnace filter prevents air from getting into the system and can damage the mechanics.
10. Remove Towels and Turn the System Back On
Now that your air ducts are clean and dust-free remove the towels covering the supply registers, replace any grills, and fire up the system.
Professional Dallas HVAC Cleaning Services
A clean HVAC system means cleaner air for people to breathe. While DIY HVAC cleaning is better than nothing, you probably don’t have the tools or processes needed to get the HVAC system pristine and entirely free of harmful contaminants.
At SERVPRO North Irving, we’ve been helping commercial property owners and homeowners achieve cleaner, healthier indoor air with our professional Dallas HVAC Cleaning Services.
Give us a call at (972) 236-4487 and contact us today for a free quote!